Input Line System

Selects the colour system when recording from the connected equipment.

This setting is effective only when recording from an external input.

NTSC

Records in NTSC or PAL-60

 

colour system.

 

 

PAL/

Records in PAL or SECAM

SECAM

colour system.

 

 

bNotes

•When picture noise appears after you change the “Input Line System” setting, change the “Input Colour System” setting (page 130). If picture noise still appears, hold down x (stop) on the recorder, and press INPUT on the recorder.

•When you change the “Input Line System” setting, the Dubbing List is erased.

Power Save

Selects whether this recorder is in power save mode when the power is turned off (standby).

Mode 1

Only aerial input signals are

 

output to the connected TV

 

when the recorder is in

 

standby.

 

 

Mode 2

No input signals are output

 

when the recorder is in

 

standby.

 

 

Off

Does not set to power save

 

mode. Normally, select this

 

setting.

 

 

bNote

Power Save mode does not function in the following cases, even when “Power Save” is set to “Mode 1” or “Mode 2.”

–There is a timer setting with “VPS / PDC” in the schedule list or Timer List.

–The SMARTLINK features are not available when “Power Save” is set to “Mode 1” or “Mode 2.”

HELP Setting

On

Displays Help information for

 

GUI displays.

 

 

Off

Does not set to HELP setting

 

mode.

 

 

EPG Type Select

Selects the EPG (Electronic Programme Guide) type to use.

The default setting varies depending on the country/region.

GUIDE

Select this to use the Gemstar

Plus+

GUIDE Plus+ electronic

 

programme guide (page 61).

 

 

Guide

Select this to use the digital

(Digital)

electronic programme guide

 

(page 50).

 

 

Easy Setup (Resetting the Recorder)

Select this to run the “Easy Setup” programme.

Follow the instructions for “Easy Setup” (page 30) from step 2.

Adjustments and Settings

125