HDD camcorder dubbing is not possible.

,An HDD camcorder which is not supported by this recorder is connected (page 94).

,The HDD camcorder is not set to the USB connection mode (page 95).

,The HDD camcorder contains only the contents that have already been dubbed to the recorder when you are dubbing using the ONE-TOUCH DUB button or “Incremental Dubbing.”

DisplayThe clock has stopped.

,Set the clock again (page 124).

The clock is wrong.

,Set the clock again (page 124). If you cannot set the clock, wait until the clock data is received and the clock is automatically adjusted.

The timer indicator is flashing.

,The disc does not have enough space.

,Insert a recordable disc into the recorder.

,The inserted DVD is protected (page 45).

The clock does not appear in the front panel display when the recorder is turned off.

,“Front Panel Display” is set to “Off” in the “Options” setup (page 141).

The title or station name is not correctly displayed.

,In some areas, letters or symbols that the recorder cannot record or display are replaced with “*.”

Remote controlThe remote does not function.

,Different command modes are set for the recorder and remote. Set the same command mode (page 141). The default command mode setting for this recorder and the supplied remote is “3 (Default setting).” You can check the current command mode in the front panel display (page 141).

,The batteries are weak.

,The remote is too far from the recorder.

,The remote’s manufacturer code returned to the default setting when you replaced the batteries. Reset the code (page 28).

,The remote is not pointed at the remote sensor on the recorder.

Others

The recorder does not detect a USB device connected to the recorder.

,Make sure that the USB device is securely connected to the recorder (page 142).

,Check if the USB device or a cable is damaged.

,Check if the USB device is on.

,The USB device is connected via a USB hub. Connect the USB device directly to the recorder.

Display language on the screen switches automatically.

,When “Control for HDMI” is set to “On” (default) in the “HDMI Output” setup (page 140), the display language on the screen automatically switches, according to the language setting of the connected TV, if you change the language settings on your TV, etc.

The ‘BRAVIA’ Sync features do not operate.

,Your TV is not compatible with the ‘BRAVIA’ Sync features.

,“Control for HDMI” is set to “Off” in the “HDMI Output” setup (page 140).

,The recorder is connected to the TV via an amplifier. Connect the recorder directly to the TV.

Information Additional

,continued 149