Sony 3-295-080-12(1) If the set top box receiver can output RGB signals, C: Receiving cable or satellite (For analogue broadcasting)

C: Receiving cable or satellite (For analogue broadcasting)

With this hookup, you can record any programme position on the set top box receiver.

To watch cable programmes, you need to match the programme position on the recorder to the aerial output programme position on the set top box receiver.

Place the set top box controller near the remote sensor on the set top box receiver.

*1

*2

Wall

	Set top box
	controller
Set top box	(page 21)
receiver
ANT IN
TO TV	SCART cord*2
	(not supplied)

Aerial cable*1

(not supplied)

to ANALOG AERIAL IN

to G-LINK

DVD recorder

to ANALOG AERIAL OUT

TV

Aerial cable (supplied)

to aerial input

: Signal flow

If your set top box receiver does not have an aerial output jack, connect the aerial to the recorder’s ANALOG AERIAL IN jack.

Connect only if your set top box receiver has a SCART connector.

If the set top box receiver can output RGB signals

This recorder accepts RGB signals. If the set top box receiver can output RGB signals, connect the TV SCART connector on the set top box receiver to the LINE 1/DECODER jack, and set “LINE 1 In” to “RGB” in the “Video In/Out” setup (page 131). Refer to the instructions supplied with the set top box receiver.

20