zHint

If you want to run “Easy Setup” again, select “Easy Setup” in the “Basic” setup from “Initial Setup” in the System Menu (page 125).

Setting up the GUIDE Plus+® system (For analogue broadcasting/in areas with GUIDE Plus+ only)

Follow the instructions below to set up the GUIDE Plus+ system and use the connected set top box receiver.

1 Press GUIDE.

The GUIDE Plus+ system “Basic Setup” appears.

2 Select an item using M/m, and pressENTER. Then set each item.

Language

Select a language for the on-screen displays using M/m, and press ENTER.

Country

Select a country/area using M/m, and press ENTER.

Postal Code

Enter your postal code using </M/m/ ,, and press ENTER.

If “Country” is set to “Others,” you cannot enter a postal code and the GUIDE Plus+ system will not search for a host channel.

•If you do not need to set up the GUIDE Plus+ system, press SYSTEM MENU to exit.

•Even if you cannot use the GUIDE Plus+ system where you live, you can still set up a manual recording. See “Setting the timer manually (Schedule)” on page 68.

External Receiver 1/External Receiver 2/External Receiver 3 (only when connecting the set top box receiver)

1Press ENTER to select “Continue.”

2Select the set top box receiver type using M/m, and press ENTER.

3Select the provider using M/m, and press ENTER.

4Select the receiver brand using M/ m, and press ENTER.

If you select “Other providers,” you can select a receiver brand from a list of all available brands.

If your receiver brand is not on the list, select “???.”

The receiver brand list is automatically updated, so your receiver may be available at a later date. Select your brand when it becomes available. Until then, use “???.”

5Select the connection you used for your set top box receiver using M/ m, and press ENTER.

When the set top box receiver is connected to the recorder using hookup C with both an aerial cable and a SCART cord, select either “Line1” or “Antenna.”

The display asks for confirmation.

6Press ENTER to select “Continue.” The Video Window switches to the specified programme position.

7Select “YES” using M/m, and press

ENTER.

The display asks for confirmation. If the Video Window does not switch to the specified programme position, select “NO” and press ENTER until the Video Window switches to the specified programme position.

32