Sony 3-295-080-12(1) Making Changes to the GUIDE Plus+ System, Menu Bar, 1 Press GUIDE, 3 Select “Setup” using, 2 Select “Source” using, 4 Select “Prog. No.” using

Making Changes to the GUIDE Plus+ System

You can customize the GUIDE Plus+ system. If the host channel has been changed or moved, and the programme guide data cannot be received, you can resolve the problem by following the steps below.

7 Wait for one day until the programme guide data can be received.

If the programme guide data has not been received after waiting for a day, search for the host channel at the following website and set the host channel manually (“Changing the GUIDE Plus+ host channel manually (Setup)” (page 64)). www.europe.guideplus.com

Searching for the GUIDE Plus+ host channel (Setup)

The default host channel setting is set to “Automatic,” so you should not have to change the host channel setting. However, if the host channel has changed or moved, update the host channel setting.

If the set top box receiver is connected to the recorder using a SCART cord only

(page 20), see “Changing the GUIDE Plus+ host channel manually (Setup)” on page 64.

1 Press GUIDE.

2 Press M to move the cursor to the

Menu Bar.

3 Select “Setup” using </,.

The GUIDE Plus+ setup menu appears.

“Setup”

4 Select “Host Channel Setup” using M/m, and press ENTER.

5 Press the yellow button (“Reset”). 6 Press [/1 to turn off the recorder.

Changing the GUIDE Plus+ host channel manually (Setup)

If the set top box receiver is connected to the recorder using a SCART cord only and you want to receive the programme guide data from your set top box receiver, search for the host channel on the following website and set it for your area, following the steps below:

www.europe.guideplus.com

1 After step 4 of “Searching for the GUIDE Plus+ host channel (Setup),” press the yellow button (“Change”) twice.

“Manual” appears.

2 Select “Source” using ,.

3 Press the yellow button (“Source”) repeatedly to select the input source.

4 Select “Prog. No.” using ,.

5 Enter the programme position number using the number buttons.

6 Press the green button (“Save”).

The display asks for confirmation.

64