Step 7: Easy Setup

Make the basic adjustments by following the on-screen instructions in “Easy Setup.” Be careful not to disconnect the cables or exit the “Easy Setup” function during this procedure.

[/1

 

GUIDE

 

</M/m/,,

EXIT/

ENTER

 

O RETURN

 

TV [/1

1 Turn on the recorder and your TV. Then switch the input selector on your TV so that the signal from the recorder appears on your TV screen.

The “Language” display appears.

•If the “Language” display does not appear, select “Easy Setup” in the “Basic” setup from “Initial Setup” in the System Menu (page 125).

2 Select a language for the on-screen displays using </M/m/,, and press ENTER.

The initial settings message appears.

3 Select “Start” using M/m, and press

ENTER.

Follow the on-screen instructions to make the following settings.

Aerial Power (for RDR-HXD795/ HXD895/HXD995/HXD1095 (except models for the UK) only)

Selects whether to supply the power to the indoor aerial connected to the DIGITAL AERIAL IN jack.

•To supply the power whether the recorder is turned on or in standby, select “On.”

•To supply the power only when the recorder is turned on, select “Auto.”

•Select “Off” to not supply the power.

D.TV Auto Channel Setting

•If the aerial cable is connected to the DIGITAL AERIAL IN jack (hookup A or B), select “Auto Scan.” Then, select your country/region using </ ,, and press ENTER. The recorder will automatically capture and store the available TV and Radio channels.

•If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup C or D) only, select “Do not set.”

For details, see page 18.

A.TV Auto Channel Setting

•If the aerial cable is connected to the ANALOG AERIAL IN jack (except hookup A) and the TV is connected to this recorder not using SMARTLINK, select “Auto Scan.” Then, select your country/region using </,, and press ENTER. The programme position order will be set according to the country/region you set.

30