Resuming Playback from the Point Where You Stopped the Disc
(Resume Play)
When you stop the disc, the receiver remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the receiver enters standby mode by pressing "/1.
Tip
To play from the beginning of the disc, press x twice, then press H.
Discs Playing
H 
x
1 While playing a disc, press x to stop playback.
“RESUME” appears in the front panel display, so you can restart the disc from the point where you stopped the disc.
If “RESUME” does not appear, Resume Play is not available.
2 Press H.
The receiver starts playback from the point where you stopped the disc in Step 1.
Notes
•Depending on where you stop the disc, the receiver may not resume playback from exactly the same point.
•The point where you stopped playing is cleared if:
–you change the play mode.
–you change the setting on the Setup Menu.