Note
When you adjust the speaker settings, the sound cuts off for a moment.
Tip
To adjust the balance or the level without listening to the test tone, select “BALANCE” or “LEVEL” in step 3 and press ENTER. Then adjust the balance or level using X/x and press
ENTER.
Press X or x repeatedly to select “TEST
TONE,” then press ENTER.
Press ENTER when you have finished making adjustments.
6
7
8 Press X or x repeatedly to select “OFF,” then press ENTER.
From your listening position, adjust the value of “BALANCE” and “LEVEL” using C/X/x/c.
When selecting “BALANCE,” the test tone is emitted from both left and right speakers simultaneously.
When selecting “LEVEL,” the test tone is emitted from only the speaker which you are adjusting.
5
Press X or x repeatedly to select “TEST
TONE,” then press ENTER.
Press X or x repeatedly to select “ON,” then press ENTER.
You will hear the test tone from each speaker in sequence.
3
4
The Setup Display appears.
Press DVD SETUP in stop mode.
1
2 Press X or x repeatedly to select “SPEAKER SETUP,” then press
ENTER.
Adjusting the speaker balance and level by using the test tone
Adjustments and Settings