SURROUND LARGE (BEHIND, LOW), LARGE (BEHIND, HIGH), LARGE (SIDE, LOW), LARGE (SIDE, HIGH), SMALL (BEHIND, LOW), SMALL (BEHIND, HIGH), SMALL (SIDE, LOW), SMALL (SIDE, HIGH):
Specify the size, position, and height to implement the Digital Cinema Surround modes in the sound field (page 46) properly. For details, see “Specifying the surround position and height” as below.
NONE: Select this if no surround speaker is used.
SURROUND LARGE: Normally select this.
BACKSMALL: Select this if small speakers are used for the surround back speaker.
NONE: Select this if no surround back speaker is used.
SUBWOOFER YES: Select this if a subwoofer is used.
NONE: Select this if no subwoofer is used.
Setting restrictionsSize setup has some restrictions. Some settings are changed automatically.
If “FRONT” is set to “SMALL”“CENTER,” “SURROUND,” and “SURROUND BACK” must be set to either “SMALL” or “NONE.”
If “SURROUND” is set to either “LARGE” or “SMALL”“SURROUND BACK” must be set to the same setting or “NONE.”
If “SUBWOOFER” is set to “NONE”“FRONT” must be set to “LARGE.”
Notes
•When you select an item, the sound cuts off for a moment.
•Depending on the settings, subwoofer output may be excessive.
If you select anything other than “NONE” in “SURROUND,” specify the size, position, and height of the surround speakers.
BEHIND (LOW): Select this if the surround speakers are located in section
Band D.
BEHIND (HIGH): Select this if the surround speakers are located in section
Band C.
SIDE (LOW): Select this if the surround speakers are located in section
Aand D.
SIDE (HIGH): Select this if the surround speakers are located in section
Aand C.
These parameters are not available when “SURROUND” is set to “NONE.”
Position diagram
| 90 |
A | 45 A |
B | B |
20
Height diagram
C C
60
D D
30
Tip
Surround speaker position and height is designed specifically for CINEMA STUDIO EX mode.
continued
Adjustments and Settings