Requires the use of POP Authentication before Send e-mail (POP before SMTP):

Check the “POP before SMTP” check box when POP authentication is needed before connecting to the SMTP server.

Ingoing Mail Server (POP3):

Enter the address of the POP3 server to be used for POP Authentication (POP before SMTP).

Account Name:

Enter the name of the e-mail account.

Password:

Enter the password for the e-mail account.

Send Test Mail:

A test e-mail message can be sent to specified destinations. Check this check box and click Apply to send a test e-mail.

NOTE

If the following items are not set or the settings are incorrect, an error message appears and the test e-mail message cannot be sent.

•Destination addresses

•The Mail Address of the Mail Account and the address of the SMTP server

Advanced (Advanced settings)

Sets the advanced settings required to use various application software on the network. Refer to the setting requirements of the application software you want to use as well.

RESET button

Press and hold this button using a thin stick for more than 3 seconds to clear all the settings you made in the Setup window.

GB12 Operations from a Computer