OTHERS CONFIG
M570: REC WITHOUT
M571: REC WITH
M572: TEMP FILE CREATE
The M572: TEMP FILE CREATE setting page appears.
4 Rotate the MULTI CONTROL knob to change the setting.
OTHERS CONFIG
M572: TEMP FILE CREATE
enable
Push SET button
enable: You can create files even after the capacity of the memory label is exceeded. Files to be created after the capacity of the memory label is exceeded are temporary files.
disable (default setting): File creation is disabled after the capacity of the memory label is exceeded.
5 Press the F5 (SET) button.
The message “Save Complete” appears.
Applying Changes to Basic Network SettingsAfter changing basic network settings, you can use M58:
1 Do steps 1 to 3 of “Basic Network Settings” (see page
9)to display the M5: NETWORK page of the maintenance menu.
2 Rotate the MULTI CONTROL knob to bring the cursor (*) to M58:
M5 : NETWORK
M50 : IP ADDRESS
M51 : SUBNET MASK
M52 : DEFAULT GATEWAY
M55 : TAPE LEADER CONFIG
M56 : IP CONFIG
M57 : OTHERS CONFIG
M58 :
M59 : RESET ALL USER
The M58:
3 Rotate the MULTI CONTROL knob to set the setting to ON.
M5 : NETWORK
M58 :
ON
Push SET Button
4 Press the F5 (SET) button.
The message “Complete” appears.
M5 : NETWORK
M58 :
ON
Complete
14 Preparations