Setting the Tape Top and the Beginning of the File

You can specify the length of the leader section at tape top, the timecode at the start of the recordable portion, and the type of video signal recorded on the leader section.

Tape top

Starting timecode

 

 

 

 

 

 

 

Leader

Header

File contents

 

section

section

 

 

Video signal type

1 Do steps 1 to 3 of “Basic Network Settings” (see page

9)to display the M5: NETWORK page of the maintenance menu.

2 Rotate the MULTI CONTROL knob to bring the cursor (*) to M55: TAPE LEADER CONFIG, and then press the F5 (SET) button.

M5 : NETWORK

M50 : IP ADDRESS

M51 : SUBNET MASK

M52 : DEFAULT GATEWAY

M55 : TAPE LEADER CONFIG

M56 : IP CONFIG

M57 : OTHERS CONFIG

M58 : M50-M52 RENEW

M59 : RESET ALL USER

The sub-page for M55: TAPE LEADER CONFIG appears.

M5 : NETWORK

M550: LEADER LENGTH

M551: LEADER TC

M552: LEADER SIGNAL

M550: LEADER LENGTH: Sets the length of the leader section at tape top. The default setting is 10 seconds.

M551: LEADER TC: Sets the timecode at the start of the recordable portion of the tape. The default setting is “00:00:00:00.”

M552: LEADER SIGNAL: Sets the type of signal recorded on the leader section of the tape and the start of each file. The default setting is “OFF” (black burst).

3 Rotate the MULTI CONTROL knob to bring the cursor (*) to the item to be set, and then press the F5 (SET) button.

4 Rotate the MULTI CONTROL knob to change the setting, and then press the F5 (SET) button.

The message “Save Complete” appears.

Viewing the Network Settings

You can use the maintenance menu to list the following network settings.

•Setting for automatic acquisition of IP address

•Whether the internet proxy is used or not

•IP address assigned to the e-VTR

•Subnet mask for the connected network

•IP address of the default gateway of the connected network

•IP address of the DNS server

1 Do steps 1 to 3 of “Basic Network Settings” (see page

9)to display the M5: NETWORK page of the maintenance menu.

2 Rotate the MULTI CONTROL knob to bring the cursor (*) to M56: IP CONFIG, and then press the F5 (SET) button.

M5 : NETWORK

M50 : IP ADDRESS

M51 : SUBNET MASK

M52 : DEFAULT GATEWAY

M55 : TAPE LEADER CONFIG

M56 : IP CONFIG

M57 : OTHERS CONFIG

M58 : M50-M52 RENEW

M59 : RESET ALL USER

A list of network-related settings appears.

Preparations 11