When the material transfer range is from the tape top to the tape end (transfer of the virtual file &whole.mxf), or from the current position to the tape end (transfer of the virtual file ¤t.mxf), you can stop the transfer automatically when a nonrecorded section is played back continuously for a specific length of time. This setting is effective when you do not know the length of the material but want to transmit from a specific position to the last point where signals are recorded.
When required, change the setting using the Setup menu
For details on setup operation, refer to the Operation Manual supplied with the VTR.
NO RF TIME
30 sec
The setting range is from 5 sec to 30 sec. The default value is 30 sec.
To enable the timecode (LTC) on the source cassette in the transmitting VTR to be recorded
For details on setup operation, refer to the Operation Manual supplied with the VTR.
TCG NETWORK REGEN MODE
off
off (default setting): The recorded timecode is regenerated by the timecode generator during recording of video/audio signals transferred through the network.
on: The timecode generator locks to the timecode of the transmitting VTR and the timecode on the source tape is copied
Notes
•When recording signals through an interface external to the network to which the VTR is connected, the recorded timecode is generated on the receiving VTR in accordance with the Function menu setting.
•When receiving files, files with regenerated timecode and files for which original timecode is copied cannot be recorded on the same tape.
Selecting the Output Audio Channel ofTo change the output audio channel of
For details on setup operation, refer to the Operation Manual supplied with the VTR.
16 Preparations