2 To send a file while playing back the tape, cue to the position from where you wish the transfer to start then press the PLAY button while holding the ENTRY button pressed.

To send a file while recording the input signal on the tape, simultaneously press the REC and PLAY buttons while holding the ENTRY button pressed.

The e-VTR starts to transfer data.

3 When the destination is an FTP server, press the STOP button when playback or recording of the portion to be transferred ends,

The file transmission operation is completed after the portion stored in the buffer memory on the network board has been completely transferred.

When the destination is an HTTP server,

transmission automatically ends when the duration specified using the Setup menu ITEM-256: HTTP TRANSFER DURATION has elapsed.

If you press the STOP button during transmission, transmission is terminated, and the file created on the destination server is erased.

To transfer a specified portion on the tape as a file

1 Play back the tape and register the IN and OUT points for the portion be transferred.

2 Press the PLAY button while holding the ENTRY button pressed.

The portion between the IN and OUT points is tranferred as a file.

Note that this operation is not possible if F6 (TR_SEL) has been set to BOTH.

Notes

•When sending both MXF D10 and MXF Proxy AV while playing back the tape or sending an MXF D10 or MXF Proxy AV signal while recording the input signal on the tape, it must be guaranteed that the destination server and the network are in sufficient conditions to send each of material files in the actual time alloted.

If the bandwidth of the network is insufficient, and transfer of the material is jammed, parts of data may be lost, and the file may not conform to the MXF file standards.

•MXF Proxy AV transmission is not possible if the Setup menu ITEM-111: TSO/PLAY has been set to FEED. Therefore, if you set F6 (TR_SEL) to Proxy or BOTH, file transmission is disabled.

To specify the transmission size (duration) for the HTTP server

When the destination is an HTTP server, it is necessary to specify the duration of the material to be sent, using the Setup menu ITEM-256: : HTTP TRANSFER DURATION in advance.

ITEM-256

HTTP TRANSFER DURATION

20 sec

20 sec, 40 sec, 60 sec, 90 sec, 120 sec, 150 sec, 180 sec: Size (duration) of the material to be sent in seconds (default setting: 20 sec)

18 Preparations