Registering e-VTRs
In the Network Device Register window, register
The system saves registered names and host names or IP addresses and displays them again in the Network Device Register window the next time you start
Network Device Register window
If the Network Device Register window is not open Select Device Register in the View menu.
Registration procedure1 Click on the Add button in the Network Device Register window to display the Add Device window.
2 In the Config Name field, enter the name of the e- VTR. In the HOST/IP Address field, enter the host name or an IP address, then click on the OK button.
The newly entered name and host name or IP address appear in the Network Device Register window.
You do not necessarily have to enter a name in Config Name field. If you do not enter a name, the system uses the name entered as the host name or the IP address.
Information you have registered in the Network Device Register window can be output to a file on a local disk of the PC.
1
The filename entry window opens.
2 Enter the filename under which data to be stored, then click on the Save button.
Information registered by the Network Device Register is stored on a local file of the PC.
Registering