Viewing the recording on TV
If your TV or VCR is a monaural type
–
Connect the yellow plug for video and the white plug for audio on both your camcorder and the TV or the VCR (you do not connect the red plug).
With this connection, the sound is monaural.
To connect to a TV or VCR without Video/Audio input jacks
Use an NTSC system RFU adaptor (not supplied).
Refer to the operating instructions of your TV or VCR and the RFU adaptor. With an RFU adaptor, the sound is monaural even on stereo models.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain
Connect the S video cable (not supplied) to the S video jacks on both your camcorder and the TV or the VCR.
Monitoring the picture from a TV or VCR
You can monitor the picture on the LCD screen. Connect your camcorder to the outputs on the TV or VCR.
Using the AV cordless IR receiver
–
Once you connect the AV cordless IR receiver (not supplied) to your TV or VCR, you can easily view the picture on your TV. For details, refer to the operating instructions of the AV cordless IR receiver.
S.LASERLINK
SUPERLASERLINK emitter
(1) After connecting your TV and AV cordless IR receiver, set the POWER switch on the AV cordless IR receiver to ON.
(2) Turn the TV on and set the TV/VCR selector on the TV to VCR.
(3) Press S.LASER LINK. The lamp of S.LASER LINK lights up.
(4) Press N on your camcorder to start playback.
(5) Point the SUPER LASER LINK emitter at the AV cordless IR receiver. Adjust the position of your camcorder and the AV cordless IR receiver to obtain clear playback pictures.
28