Recording From CDs
Fading out at the specified time (Time Fade)
You can have the player fade out automatically by specifying the playing time. Once you set the Time Fade, it works twice, that is, the play fades out at the end of both sides of a tape.
1Press EDIT/TIME FADE repeatedly before you
start playing until 
and “A” in the A indication appear in the display.
2Press - or ± to specify the playing time.
Each time you press these buttons, the display changes as shown below, with the playing time of one side following each indication.
n
(23.00) (27.00) (30.00) (37.00) (45.00)
3Press á to start playing.
At the specified time the play fades out and the
player pauses. “B” in the | B indication appears |
in the display. |
|
4To record on side B, reverse the tape and press á or Pon the player to resume playing.
Again, the play fades out at the specified time.
To cancel Time Fade
Press EDIT/TIME FADE .
You can freely specify the playing time
See “You can freexly specify the tape length” on page 14.
You can change discs during Time Fade
If the play ends before the specified
You can fade in to resume playing in Step 4
After you reverse the tape, press FADER.
Note
If you press 0 or )during Time Fade, Time Fade will be cancelled.
Adjusting the Recording Level (Peak Search)
The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
| PEAK SEARCH |
|
| p | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Before you start playing, press PEAK SEARCH. “PEAK” flashes in the display and the player repeats the portion of the highest level.
2Adjust the recording level on the deck.
3Press p on the player to stop Peak Search. “PEAK” disappears from the display.
Notes
∙The portion with the highest level may differ every time you try the adjustment on the same disc. The difference is, however, so slight that you won’t find any problem in adjusting the recording level precisely.
∙Peak Search does not operate while you open the disc tray by pressing
