Playing CDs
4To programme other discs or tracks, do the following:
To programme | Repeat Step(s) |
|
|
Other discs | 2 |
|
|
Other tracks on the same disc | 3 |
|
|
Other tracks on other discs | 2 and 3 |
|
|
5Press áto start Programme Play.
To cancel Programme Play
Press CONTINUE.
You can create your programme while checking the disc labels
While the disc tray is open, follow Steps 1 to 5 with pressing DISC SKIP to check the disc labels. If you close the disc tray before Step 5, the total playing time appears in the display after a while.
Note that, if the programmed track number isn’t found on the disc, that step is automatically erased.
The programme remains even after the Programme Play ends
When you press á, you can play the same programme again.
The programme remains until you erase it or turn off the player
If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren’t found in the player or on the disc are deleted from the programme, and the rest of the programme is played in the programmed order.
Note
The total playing time doesn’t appear when:
minutes.
Checking the track order
You can check your programme before or after you start playing.
Press CHECK.
Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and “AL” indication) of each step in the programmed order. After the last step in the programme, the display shows “End” and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps.
Changing the track order
You can change your programme before you start playing.
To | Press |
|
|
Erase a track | CHECK until the track you |
| don’t want appears in the |
| display, then press CLEAR |
|
|
Erase the last track in the | CLEAR. Each time you press |
programme | the button, the last track will |
| be cleared. |
|
|
Add tracks to the end of the | DISC 1 – 5 to select the disc, |
programme | then number buttons of the |
| tracks to be added |
|
|
Change the whole | CLEAR until “ALL CLr” |
programme completely | appears in the display. |
| Create a new programme |
| following the programming |
| procedure. |
|
|
