Locating a Specific Disc, Playing CDs, To locate, Press

While the disc tray is open by pressing EX-CHANGE

3Press DISC SKIP.

The disc tray turns and other two disc compartments appear.

4Replace discs in the compartments with new ones.

5Press EX-CHANGE. The disc tray closes.

While the disc tray is open by pressing EX-CHANGE

•If the playback of the current disc ends, the player stops playing. If the disc is played in 1Ê DISC Repeat Play mode (see page 10), the current disc starts playing again.

•In ALL DISCS Shuffle Play mode (see page 10), tracks are reshuffled on the current disc.

•In Programme Play mode (see page 11), only the tracks on the current disc are played.

•Do not push the disc tray to close it in Step 5, as you may damage the player.

Locating a Specific Disc

You can locate any disc before or while playing a disc.

		DISC 1 – 5			DISC CHECK á DISC SKIP

To locate	Press

The next disc	DISC SKIP while playing a disc

A specific disc directly	DISC 1 – 5

A disc while checking the	DISC CHECK while the disc
labels	tray is open. The disc tray turns
	to show you each disc label.
	When the disc you want comes
	in front of you, press áto
	start playing.

A disc by scanning the first	DISC CHECK before you start
track of each disc for 10	playing while the disc tray is
seconds	closed. When you find the disc
	you want, press áto start
	playing.

You can extend the playing time during scanning the discs

Press DISC CHECK repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.

Playing CDs

Notes

•When you press DISC CHECK, the play mode automatically changes to ALL DISCS Continuous Play mode.

•When you’ve opened the disc tray by pressing EX-CHANGE, you cannot use the DISC CHECK function.

•Even if you press DISC CHECK while “REPEAT” appears in the display (see page 10), the player stops after scanning all the discs once.

Locating a Specific Track or a Point in a Track

You can quickly locate any track while playing a disc using the -/± (AMS: Automatic Music Sensor) buttons or number buttons. You can also locate a specific point in a track while playing a disc.