Changing the display items

Each time you press (AF/TA), the item changes as follows:

Ó AF on

ÓTA on

ÓAF TA on*

 

 

 

 

AF TA off Ò

 

 

 

 

*Select this to turn on both the AF and TA functions.

Notes

•“NO AF” and the station name flash alternately, if the unit cannot find an alternative station in the network.

•If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Push the SEEK/AMS control up or down while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI seek” appears and no sound is heard). If the unit cannot find another frequency, “NO PI” appears, and the unit returns to the originally selected frequency.

EN

Listening to a regional programme

 

The “REG on” (regional on) function lets you

 

stay tuned to a regional programme without

 

being switched to another regional station.

 

(Note that you must turn the AF function on.)

 

The unit is factory preset to “REG on,” but if

 

you want to turn off the function, do the

 

following.

 

1 Press (SHIFT), then press (4) (PLAY

 

MODE) repeatedly until “REG” appears.

 

2 Press (5) (n) repeatedly until “REG off”

 

appears.

 

3 Press (SHIFT).

 

Note that selecting “REG off” might cause

 

the unit to switch to another regional

 

station within the same network.

 

To go back to regional on, select “REG on” in

 

step 2 above.

 

Note

 

This function does not work in the United

 

Kingdom and in some other areas.

Local link function (United Kingdom only)

The Local Link function lets you select other local stations in the area, even though they are not stored on your number buttons.

1 Press a number button ((1) to (10)) that has a local station stored on it.

2 Within five seconds, press the number button of the local station again.

3 Repeat this procedure until the desired local station is received.

16