Presetting the RDS stations with the AF and TA data

When you preset RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset station, or the same setting for all preset stations.

Presetting the same setting for all preset stations1 Select an FM band (page 13).

2 Press (AF/TA) repeatedly to select either “AF on,” “TA on” or “AF TA on” (for both AF and TA functions).

Note that selecting “AF TA off” stores not

EN only RDS stations, but also non-RDS stations.

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n) until “B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for each preset station1 Select an FM band, and tune in the desired station.

2 Press (AF/TA) repeatedly to select either “AF on,” “TA on” or “AF TA on” (for both AF and TA functions).

3 Press and hold the desired number button until “MEM” appears.

Repeat from step 1 for presetting other stations.

Tip

If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning the AF or TA function on or off.

Recording the traffic announcements

—Traffic Information Replay (TIR)

You can listen to the latest traffic announcements by recording them. The unit automatically records and stores up to eight traffic announcements. If the recording exceeds eight minutes, the recorded announcements are updated, so you can always hear the latest information.

The TIR function turns on the unit automatically and records the traffic announcements for up to two hours before and after a preset time.

Presetting the time and the station1 Press and hold (TIR) until “TIR” lights up in the display.2 Press (5) (n) repeatedly until “TIR on” appears.

REG

3 Press (TIR) repeatedly until the hour indication appears.

REG

1Set the hour by rotating the dial.

REG

2Press (5) (n) until the minute digits flash.

REG

3Set the minute by rotating the dial.

REG

4 Press (TIR).

18