Requesting a registered source

Youcanrequestaregisteredsourcewhile listeningtoothersourcesorduringtheclock display.

1 Press (TALK) on the rotary commander.

VOICE

2 After you hear the unit’s vocalised instruction “Please speak now.”, pronounce the registered phrase such as the disc name or the radio station.

Please speak now.

3 When the unit successfully recognised the phrase;

The unit will play the disc or tune in the radiostation.

When the unit fails to recognise the phrase;

Theunitreplies“Pleasespeakagain.” Inthiscase,repeatthesameregistered phrase.

Notes

•When the unit fails to recognise the phrase three times, a beep sounds and the unit returns to the previous source. In this case, repeat the same process starting from step 1.

•If it is noisy outside the car, the unit may not recognise the registered phrase. In this case, close the window and try again.

•If you are far from the microphone, speak louder or come nearer to the microphone.

Tips

•If you do not reply within three seconds after the vocalised instruction, the unit replies “Please speak now.”

•When you are requesting a registered source, pronounce clearly and loudly to make it easier for the unit to recognise.

•When the unit has difficulty recognising the phrase, register the vocal phrase again.

Voice Memo

VoiceMemoisafunctionthatallowsyouto recordavoicedmemorandum,suchasthe nameofasongheardonaradioprogrammeor anideawhichcomestomind. Youcanrecord uptosixvoicememoswiththisfunction. Note thateachvoicememomustbewithin15 seconds.

 

MEMO 1

MEMO 6

MEMO 2

MEMO 5

MEMO 3

 

MEMO 4

Youcanrecordorplaybackthevoicememo whenlisteningtoanysourceorduringthe clockdisplay.

Usetherotarycommandertocontrolthis function.

Note

While the unit is receiving, recording, or playing back the traffic announcements, the voice memo function does not work.

Recording a voice memo

1 Press (REC) on the rotary commander and voice your memorandum towards the supplied microphone.

VOICE

2 The recording is completed by pressing (REC) again or leaving the unit untouched for 15 seconds.

Notes

•The voice memos are recorded as “MEMO 1”, “MEMO 2”, etc.,…in the order they are recorded.

•When a beep sounds and “MEMO FULL” appears, it means there is no room for additional voice memos. In such a case, erase the older recorded voice memos before recording new ones.

EN

Memo Drive/Voice Voice

23