Sony CDX-C880R Scanning the tracks, — Intro Scan, — Auto Scroll, Manual Search, —Manual Search, 4 Press (SHIFT), 3 Press (SHIFT), “A.Scrl” appears, —Direct Disc Selection

You can label CD and CD TEXT discs with a personalisednameusingthediscmemo function;referto“LabelingaCD”(page32). However,ifyouusepersonalisedlabels,they willalwaystakepriorityovertheoriginalCD TEXTinformationwhensuchinformationis displayed.

Tips

•If the name of the MD or CD TEXT disc is too long, you can scroll it across the display by pressing (SHIFT), then (2) (N).

•If you want to display the original CD TEXT information after labelling the CD TEXT disc with

a personalised name, press (SHIFT) , then (5) (n).

	Automatically scrolling a disc name
	— Auto Scroll
	Ifthediscname/artistnameortracknameon
	a CD TEXT disc or MD exceeds 10 characters
	andtheAutoScrollfunctionison,
	automaticallyscrollsonthedisplayasfollows:
EN	• The disc name appears when the disc has
	changed (if the disc name is selected).
	• The track name appears when the track has
	changed (if the track name is selected).
	Ifyoupress (DSPL)tochangethedisplay
	item, the disc or track name of the MD or CD
	TEXTdiscisscrolledautomaticallywhether
	yousetthefunctiononoroff.
	1 During playback, press (SHIFT).
	2 Press (3) (SET UP) repeatedly until
	“A.Scrl” appears.
	3 Press (5) (n) to select “A.Scrl on.”
	4 Press (SHIFT).
	To cancel Auto Scroll, select “A.Scrl off” in
	step3above.
	Note
	For some CD TEXT discs with a lot of characters,
	the following cases may happen:
	— Some of the characters are not displayed.
	— Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down once for each track you want to skip.

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track

—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

To search forward

To search backward

Locating a disc by disc number—Direct Disc Selection

Press the number button ((1) to (10)) that corresponds with the desired disc number.

Thedesireddiscinthecurrentunitbegins playback.

Scanning the tracks— Intro Scan

Youcanplaythefirst10secondsofallthe tracksonthecurrentdisc.

1 During playback, press (SHIFT), then press (4) (PLAY MODE) repeatedly until “Intro” appears.

2 Press (5) (n) to select “Intro on.” IntroScanstarts.

3 Press (SHIFT).

Toreturntonormalplaybackmode,select “Introoff”instep2above.

28