Adjusting the listening position1 Press (SOUND)fortwoseconds.

2 Press (SOUND)repeatedly until the desired listening position appears.

3 Press (5) n).

4 Rotatethedialtoadjustthecentreof thesoundfieldtotheleftorright.Then setthecentreofthesoundfield.

Centre moves to the L (left).

Centre moves to the R (right).

5 Press (5) n).

6 Rotatethedialtoadjustthecentreof thesoundfieldtothefrontorrear.

Centre moves to the R (rear).

Centre moves to the F (front).

7 Press (SOUND)fortwoseconds. When the effect setting is complete, the normal playback mode appears.

Adjusting the fader (FAD)

Normally, with the DSP mode on, the volume of the output sound from the rear speakers is lowered automatically to improve the efficiency of the listening position setting. If you want to raise the rear speaker volume, adjust the fader.

1 Followsteps1to3of“Selectinga surroundmenu”(page35).

2 Press (SOUND)repeatedlyuntil“FAD” appears.

3 Rotatethedialtoadjustthefader.

Decreases front speaker volume

Increases front speaker volume

After three seconds, the display returns to the normal playback mode.

Adjusting the volume of the subwoofer(s)

1 Press (SOURCE)toselectasource(tuner,

CD,orMD).

2 Press (SOUND)repeatedlyuntil“SUB” appears.

3 Rotate the dial to adjust the volume.

After three seconds, the display returns to the normal playback mode.

Tip

When you rotate the dial to turn the volume all the way down, “Sub ATT” appears and the cutout frequency of the subwoofer is disabled.

continue to next page n

EN

DSP

37