Sony CDX-S2200 Storing only the desired stations, Receiving the stored stations

Receiving the stored stations

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

If preset tuning does not work

— Automatic tuning/Local Seek Mode

Automatic tuning:

Press (SEEK) (+) or (SEEK) (–) to search for the station.

Scanning stops when the unit receives a station. Repeat the operation until the desired station is received.

Local Seek Mode:

If the automatic tuning stops too frequently, press (SENS) (BTM) repeatedly until “LOCAL-ON” appears in the display.

Only the stations with relatively strong signals will be tuned in.

To cancel the local seek mode, press (SENS) (BTM) twice when receiving FM.

Note

When receiving MW or LW, to cancel the local seek mode, press (SENS) (BTM) (“LOCAL-OFF” appears).

Tip

If you know the frequency of the station you want to listen to, press and hold (SEEK) (+) or (SEEK) (–) to locate the approximate frequency, then press (SEEK) (+) or (SEEK) (–) repeatedly to fine adjust to the desired frequency (manual tuning).

If FM stereo reception is poor

—Monaural Mode

During radio reception, press (SENS)

(BTM) repeatedly until “MONO-ON” appears in the display.

The sound improves, but becomes monaural (“ST” disappears).

To return to normal radio reception mode, press (SENS) (BTM) (“MONO-OFF” appears).

Storing only the desired stations

You can manually preset the desired stations on any chosen number button.

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press (SEEK) (+) or (SEEK) (–) to tune in the station that you want to store.

4 Press the desired number button ((1) to (6)) for 2 seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

13