4 Press CD u to start Programme Play.
On the remote
1 Press FUNCTION repeatedly until “CD” appears on the display.
2 Press MODE repeatedly until “PGM” appears on the display.
3 Press the number buttons or ./m, M/
> for the tracks or files (or press + or – for the groups) you want to program in the order you want.
4 Press u.
To cancel Programme Play
Stop playing first. Then press MODE/DIR repeatedly until “PGM” disappears from the display.
To check the order of tracks before play
Press the jog dial after step 2.
Every time you press the jog dial, the track or file number appears in the programmed order.
To change the current programme
Press STOP x once after step 2. The current programme will be erased. Then create a new programme following the programming procedure.
Tips
•You can play the same programme again, since the programme is saved until you open the CD tray.
•You can record your own programme. After you have created the programme, insert a blank tape into the tape compartment then start recording (see page 15).
Playing tracks
repeatedly (Repeat play)You can play tracks repeatedly in normal play mode and other play modes you want.
REP/RDS
FUNCTION (or REPEAT)
1 Press FUNCTION repeatedly until “CD” appears on the display when the player is not in CD mode.
2 Play the CD.
You can play tracks repeatedly in normal play mode and other play modes you want (see pages 21– 25).
3 Press REP/RDS (or REPEAT) until
“” appears on the display.
To cancel Repeat play
Press REP/RDS (or REPEAT) until “ ” disappears from the display.
Player CD The