To check/change the waking up timer settings
Press TIMER to check the setting.
To change the setting, display the setting you want to change, select the setting item by pressing TUNING + or TUNING – or the jog dial and
To use the player before a timer playback starts
If you turn on the player, you can use it as usual ( in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 34, you will hear that station at the preset time.) Turn off the player before the preset time.
To stop play
Turn off the power.
Note
You cannot preset waking up timer and recording timer at the same time.
Tips
•To exit the standby mode, press STANDBY to
make the 
indicator disappear.
•The preset settings remain until you reset them.
•When you press STANDBY during playback, the power will go off and the player will enter the standby mode.
Timer-recording radio programmes
You can set timer to record the radio at a certain time. You can also record the sound of the component connected to the LINE IN jack, using the timer. Make sure you have set the clock (see “Setting the clock” on page 33).
MODE/DIR | Jog dial | ||
| |||
| (PUSH ENTER/ | ||
FUNCTION MEMORY) | |||
|
|
| STANDBY |
|
|
|
|
|
|
|
|
Before you begin, make sure the 
(clock) indicator is not lit on the display. If it is lit, press STANDBY.
1 Tune in the radio station and insert a blank tape into the tape compartment with the side you want to record on facing up.
2 Press FUNCTION repeatedly until “TAPE” appears on the display.
3 Press MODE/DIR to select recording direction of the tape.
| Display |
One side | g |
Both sides | h |
|
|
continued
Timer The