Setting up the AM loop aerials
3Connecting the mains lead
1Connect the mains lead from the left speaker to the SPEAKER OUT (POWER IN) socket located at the rear of the player.
2Insert the end of the mains lead from the left speaker to the mains.
Note
If you disconnect the mains lead or a blackout has occurred, the clock setting and other preset settings may return to the initial settings. In this case you need to reset the clock and/or other preset settings.
Changing the AM tuning interval
The AM tuning interval is preset to 9 kHz at the factory.
If you need to change the AM tuning interval, do the following:
1Press TUNER BAND•AUTO PRESET until “AM” is displayed.
2Press the jog dial for 2 seconds.
3Press TUNER BAND•AUTO PRESET for 2 seconds.
“AM 9kHz” or “AM 10kHz” flashes.
4Press ./mor M/>to select “AM 9kHz” for 9 kHz interval or “AM 10kHz” for 10 kHz interval.
5Press the jog dial to enter the selection.
After changing the tuning interval, you need Setting to reset your preset AM radio stations.
Up
4Inserting batteries into the remote
Insert two R03 (size AAA) batteries (not supplied).
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.