Sony CMT-DF1 Loading a tape, Playing a tape, — Manual Tuning, 29GB, Press, Load a tape, on the unit, Tape – Play, To cut the sound, Other operations, Play – Tuner/Tape

Load a tape.

Press xZ on the unit.

Listening to non-preset radio station

— Manual Tuning

1 Press TUNER/BAND repeatedly to select “FM” or “AM.”

2 Press TUNING + or – repeatedly to tune in the desired station.

To cut the sound

Press MUTING.

Press MUTING again or VOLUME + to restore sound.

To listen to an FM stereo program without stereo effect

When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.

Tips

•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

•You can record the radio programs on a tape (page 30).

Tape – Play

Loading a tape

1 Open the cover in the lower part of the unit.

2

3 Load a recorded/recordable tape into the cassette holder.

With the side you want to play/record facing forward.

Playing a tape

You can use TYPE I (normal) tape.

1

2 Press TAPE (or FUNCTION + or – repeatedly) to switch the function to TAPE.

3 Press N on the unit.

Playback starts.

Other operations

To	Do this
Stop play	Press xZ on the unit.
Pause	Press X on the unit. Press the
	button again to resume play.
Fast-forward or	Press m or M on the unit.
rewind
Cut the sound	Press MUTING.
	Press MUTING again or
	VOLUME + to restore sound.
Remove a tape	Press xZ on the unit in stop
	mode.

Play – Tuner/Tape

29GB