Optional Components

Controlling the TV with the remote

You can use the following buttons on the remote to operate a Sony TV.

To

Press

Turn the TV on or off

TV ?/1 while holding

 

down the TV button

 

 

Switch the TV’s input

TV/VIDEO while holding

source between the TV

down the TV button

and other input sources

 

Change the TV channels TV CH +/– or the number buttons while holding down the TV button

Adjust the volume of

TV VOL +/– while holding

the TV speaker(s)

down the TV button

 

 

Using the THEATRE SYNC function

THEATRE SYNC allows you to turn on your SONY TV and this system, change the system mode to “DVD,” and then switch the TV’s input source you set with one button push.

Use the remote for the operation.

1 Press and hold TV/VIDEO while entering the code for the TV’s input source connected to this system (see the table below) using the number buttons.

TV’s input source is selected.

Number

TV’s input source

0

No input source (Default)

 

 

1

VIDEO1

 

 

2

VIDEO2

 

 

3

VIDEO3

 

 

4

VIDEO4

 

 

5

VIDEO5

 

 

6

VIDEO6

 

 

7

VIDEO7

 

 

8

VIDEO8

 

 

Number

TV’s input source

9

COMPONENT 1 INPUT

 

 

CLEAR

COMPONENT 2 INPUT

 

 

DSGX

COMPONENT 3 INPUT

 

 

ENTER

COMPONENT 4 INPUT

 

 

2 Press and hold TV CH + while entering the code for transmit time (see the table below) using the number buttons.

The transmit time from the remote is selected.

Number

Transmit time

1

0.5 (Default)

 

 

2

1

 

 

3

1.5

 

 

4

2

 

 

5

2.5

 

 

6

3

 

 

7

3.5

 

 

8

4

 

 

Notes

•This function is only for SONY TV series, however, some TV products may also not work.

•If this function does not work, change the transmit time. The transmit time varies depending on the TV.

•If distance between the TV and this system is too far, this function may not work. Install the system near the TV.

•Keep the remote pointed in the direction of the TV and this system.

Components Display/Optional
33GB