Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component.

TV or projector

 

Amplifier or MD deck

 

 

 

To the component video input jack of the TV or projector

To the digital input jack of the digital component

To the video input jack of the TV

TV

To the S video input jack of the TV

TV

ADIGITAL OUT (OPTICAL) jack

Use a digital optical cord (square, not supplied) to connect an amplifier, MD deck or DAT deck with a digital optical input jack. Sound is then output when the system function is set to DVD. By connecting this system to the optical input jack of the optional amplifier equipped with Dolby Digital or DTS decoder, you can enjoy the 5.1 channel sound.

In addition, when the CD or DVD audio is linear PCM, you can make a digital recording from this system to an MD deck or DAT deck.

BCOMPONENT VIDEO OUT jacks

Use an optional video cord to connect a TV. If your TV accept progressive format file signals, you must use this connection and set the progressive setting to “P-SCAN” (page 23).

CS VIDEO OUT jack

Use an S video cord (not supplied) to connect an optional TV to this jack. You can enjoy higher quality video images.

DVIDEO OUT jack

Use a video cord (supplied) to connect the video input of TV to this jack.

34GB