Recording on a connected component

1

2

3

4

Connect a digital optical cord.

See “Hooking up optional components” (page 34).

Press DVD (or FUNCTION + or – repeatedly) to switch the function to DVD.

Playback starts automatically if a disc with auto playback function is loaded. Press x to stop playback. To cancel Resume Play, press x twice.

Start recording with the connected digital component (MD deck, etc.).

Refer to the operating instructions provided with the connected component.

Press H (or NX on the unit) to start playing.

Notes

•You cannot make a digital recording in the following cases.

–Copy guarded DVDs

–DVD Dolby Digital or DTS bit stream output

–CD-Rs/CD-RWs recorded in music CD format

•You cannot make a recording when “SPDIF Output” under “SPDIF Setup” in “Audio Setup Page” is set to “SPDIF Off.”

36GB