Notes

•When playing MP3 files, sound is not output from the DIGITAL OUT (OPTICAL) jack.

•You can record digital audio from this system only when DVD function is selected.

•You cannot make a digital recording of a copy guarded disc using a digital component connected to this system. Also, playback may not be possible depending on the connected component.

•When you connect a component that does not support Dolby Digital or DTS to the DIGITAL OUT (OPTICAL) jack and output a Dolby Digital or DTS bit stream, noise may be heard from the connected component.

Enjoying the 5.1 channel sound with the optional amplifier

1 Connect a digital optical cord.

See “Hooking up optional components” (page 34).

2 Connect 6 speakers to an AV amplifier equipped with a decoder.

For the speaker placement, refer to the operating instructions supplied with the connected amplifier.

3 Press SETUP in stop mode.

The Setup Menu appears.

4 Press < or , repeatedly to select “Audio Setup Page,” then press

ENTER.

5 Press M or m repeatedly to select “SPDIF Setup,” then press ENTER.

“SPDIF Output” appears.

6 Press ENTER.7 Press M or m repeatedly to select “SPDIF/RAW,” then press ENTER.

8 Press SETUP to turn off the Setup Menu.

9 Switch the output to 5.1 channel Dolby Digital sound or 5.1 channel DTS sound.

See “Changing the sound” (page 20).

Components Optional
35GB