Adjusting the audio settings

— Audio Setup

1 Press SETUP in stop mode.

The Setup Menu appears.

2 Press < or , repeatedly to select “Audio Setup Page,” then press

ENTER.

3 Press M or m repeatedly to select “Speaker Setup” or “SPDIF Setup,” then press ENTER.

4 Press ENTER again.

5 Press M or m repeatedly to select a setting, then press ENTER.

6 Press SETUP to turn off the Setup Menu.

Speaker Setup

xDownmix

When playing 5.1 channel sound, this switches how the rear speaker sound is output from the system speakers.

The default setting is underlined.

LT/RT

Select this to mix the rear left and

 

right channel sound to monaural

 

and output it combined with each

 

of the front left and right channels.

 

 

Stereo

Select this to output the rear left

 

channel sound combined with the

 

front left channel sound, and the

 

rear right channel sound combined

 

with the front right channel sound.

 

 

SPDIF Setup

xSPDIF Output

This switches the method for outputting 5.1 channel sound from the DIGITAL OUT (OPTICAL) jack on the back of the system. The default setting is underlined.

SPDIF Off

Sound is not output from the

 

DIGITAL OUT (OPTICAL) jack.

 

 

SPDIF/RAW

Select this to enjoy 5.1 channel

 

sound when an optional amplifier

 

is connected (see “Enjoying the

 

5.1 channel sound with the

 

optional amplifier” (page 35)).

 

 

SPDIF/PCM

Select this to enjoy 2 channel

 

PCM sound when an optional

 

amplifier is connected.

 

 

Tip

You can reset all the settings except for Parental Control by performing the operations described under “To return the settings to the default settings*, perform reset as follows:” (page 40).

* Except for Parental Control settings

24GB