Labeling a CD (continued)
4 Enter a character.
Type of character | Do this |
Uppercase or | Press the corresponding |
lowercase letters | letter button on the remote |
| repeatedly until the |
| character to be entered |
| flashes. Or press the button |
| once and press .or |
| >repeatedly. Then |
| press CURSORt on the |
| remote. |
|
|
Numbers | Press the corresponding |
| number button on the |
| remote. |
|
|
Blank space | Press 10/0 on the remote. |
|
|
Symbols | Press number 1 on the |
(‘ | remote repeatedly. |
|
|
Symbols | Press number 1 on the |
(& + < > _ = ” ; # $ | remote and press .or |
% @ `) | >repeatedly. Then |
| press CURSORt on the |
| remote. |
|
|
5 Repeat steps 3 and 4 to enter the rest of the name.
6 Press ENTER/YES on the remote.
“ Complete!” appears.
To erase and change a character
In step 3 or 4, press TCURSOR or
CURSORt on the remote repeatedly until the character you want to change flashes. Press CLEAR on the remote to erase the character, then repeat steps 3 and 4.
To cancel labeling
Press MENU/NO on the remote.
To add a character
After step 2, press TCURSOR or
CURSORt on the remote repeatedly to move the cursor to the place where you want to add a character. Then proceed to step 3.
Checking the disc titles
1 Press FUNCTION repeatedly to switch the function to CD.
2 Press MENU/NO on the remote in stop mode.
3 Press . or > on the remote repeatedly until “Name Check?” appears, then press ENTER/YES on the remote.
4 Press . or > on the remote repeatedly to select the disc titles stored in the system memory between 001 and 100.
To check the current disc title
Press SCROLL on the remote in stop mode.