Sony CMT-EX5 Labeling a CD, 11GB, — Disc Memo, continued, 2 Press NAME EDIT/SELECT on the remote in stop mode, 1 Press FUNCTION repeatedly to switch the function to CD

Other operations

To	Do this
Check the	Press . or > repeatedly
program order	during Program Play.

Check the total	Press TIME on the remote in
number of	stop mode. The total number of
programed tracks	programed tracks appears,
	followed by the last programed
	track number and the total
	playing time of the program.

Cancel Program	Press PLAY MODE on the
Play	remote in stop mode repeatedly
	until “ PROGRAM” and
	“ SHUFFLE” disappear.

Add a track to the	Do steps 3 and 4.
end of the program
in stop mode

Erase a track	Press CLEAR on the remote in
	stop mode. Each time you press
	the button, the last programed
	track is erased.

Tips

•The program you made remains after Program Play finishes. To play the same program again, switch the function to CD, then press NX (or CD Non the remote).

•“––.––”appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.

Labeling a CD

— Disc Memo

You can label up to 100 CDs with titles of up to 20 symbols and characters. Whenever you load a labeled CD, the title appears.

1 Press FUNCTION repeatedly to switch the function to CD.

If “ SHUFFLE” or “ PROGRAM” appears, press PLAY MODE on the remote repeatedly until both disappear.

2 Press NAME EDIT/SELECT on the remote in stop mode.

The cursor starts flashing.

3 Press NAME EDIT/SELECT on the remote repeatedly to select the desired type of character.

Type of character	Select
Uppercase letters/	Selected AB
blank space/symbols

Lowercase letters/	Selected ab
blank space/symbols

Numbers	Selected 12

continued