Waking up to music

— Play Timer

By setting the Play Timer, you can make the system automatically turn on and off at specified day and times. To use this function, make sure that you have set the system clock correctly (see “ Setting the clock” on page 8).

1 Prepare the sound source you want to play.

CD: Load a CD. To start from a specific track, make a program (see “ Programing CD tracks” on page 10).

Radio: Tune in the preset radio station that you want (see “ Listening to the radio” on page 15).

2 Press VOLUME + or –(or VOL + or –on the remote) repeatedly to adjust the volume.

3 Press CLOCK/TIMER SET on the remote.

PLAY SET?” flashes, then press ENTER/ YES on the remote.

4 Press . or > on the remote repeatedly until the type of timer you want appears, then press ENTER/YES on the remote.

To play

Select

Only once

PLAY ONCE?

 

 

Everyday

PLAY DAILY?

 

 

The same day(s)

PLAY WEEKLY?

every week

 

 

 

5 Set the time to start playing.

If you selected “ PLAY ONCE?” or “ PLAY WEEKLY?” in step 4, press .or > on the remote to set the day, then press ENTER/YES on the remote.

The hour indication flashes.

Press . or > on the remote repeatedly to set the hour, then press ENTER/YES on the remote.

The minute indication flashes.

Press . or > on the remote repeatedly to set the minute, then press ENTER/YES on the remote.

The following indication flashes again if you selected in step 4:

PLAY ONCE?” or “ PLAY WEEKLY?” : The day indication

PLAY DAILY?” : The hour indication.

6 Set the time to stop playing following the procedure in step 5.
7 Press . or > on the remote repeatedly until the desired sound source appears.

The indication changes as follows:

TUNER y CD PLAY

8 Press ENTER/YES on the remote.

The type of timer, the start time, the stop time, the sound source, and the volume appear in turn, then the original display returns.

9 Press @/1 to turn off the system.

18GB