Labeling the preset

stations

Station Name

You can label each preset station with up to 10 symbols or characters (Station Name).

1 Tune the preset station you want to label (see “ Listening to the radio” on page 15).

2 Follow the same procedures as from steps 2 to 6 of “ Labeling a CD” on page 11.

To cancel labeling

Press MENU/NO on the remote.

To erase the name

1Tune the station.

2Press NAME EDIT/SELECT on the remote.

3Press CLEAR on the remote repeatedly to erase the name.

4Press ENTER/YES on the remote.

Using the Radio Data

System (RDS)

(European model only)
What is the Radio Data System?

Radio Data System (RDS)* is a broadcasting service that allows radio stations to send additional information along with the regular program signal.

Note

RDS may not work properly if the station you have tuned in is not transmitting the RDS signal properly or if the signal is weak.

*Not all FM stations provide RDS service, nor do they all provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Receiving RDS broadcasts
Simply select a station from the FM band.

When you tune in a station that provides RDS services, the station name appears in the display.

To check the RDS information

Each time you press DISPLAY, the display changes cyclically as follows:

Station name** t Frequency t Clock display t Volume

**If the RDS broadcast is not properly received, the station name may not appear.

16GB