3Connect the FM/AM antennas.

Set up the AM loop antenna, then connect it.

AM antenna

AM loop

antenna

Black

White

FM antenna (Jack type A)

Extend the FM wire antenna horizontally

FM antenna (Jack type B)

Extend the FM wire antenna horizontally

FM antenna (Jack type C)

Extend the FM wire antenna horizontally

4Reinstall the rear cover.

Pass the wires under the rear cover.

Started Getting5Connect the power cord to a wall outlet.

If the plug does not fit the wall outlet, attach the supplied plug adapter (only for models equipped with an adapter).

To turn on the system, press @/1.

Note on the front glass

The front glass is made of tempered glass. Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass. This glass, however, may shatter if it receives a sharp blow or if it is scratched.

Note

Depending on the connected cords or antennas, you may not be able to reinstall the rear cover.

Preparing the remote

Pull out the insulating sheet to allow power to flow from the battery.

The remote already contains a battery.

7GB