Turn on the system.

Replacing the battery in

the remote

1 Slide out and remove the battery case.2 Insert a new lithium battery CR2025 with the + side facing up.

A lithium battery CR2025

3 Slide the battery case back in.

Tip

When the remote no longer operates the system, replace the battery with a new one.

Note

If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage and corrosion.

Notes on lithium battery

Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

Wipe the battery with a dry cloth to assure a good contact.

Be sure to observe the correct polarity when installing the battery.

Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

WARNING

Battery may explode if you mistreated.

Do not recharge, disassemble or dispose of in fire.

Setting the clock

1

2 Press CLOCK/TIMER SET on the remote.

The day indication flashes.

3 Press . or > on the remote repeatedly to set the day, then press ENTER/YES on the remote.

The hour indication flashes.

4 Press . or > on the remote repeatedly to set the hour, then press ENTER/YES on the remote.

The minute indication flashes.

5 Press . or > on the remote repeatedly to set the minuite, then press ENTER/YES on the remote.

If you made a mistake

Press TCURSOR or CURSORt on the remote repeatedly until the indication you want to change (day, hour, minuite) flashes, and then change the setting.

To adjust the clock

1Press CLOCK/TIMER SET on the remote.

2Press . or > on the remote repeatedly to select “CLOCK SET?”, then press ENTER/YES on the remote.

3Do the same procedures as steps 3 to 5 above.

8GB