![](/images/backgrounds/18905/18905-2822x1.png)
Listening to audio from a
connected component
1 Connect the audio cord.See “ Hooking up optional components” on page 21.
2 Press FUNCTION repeatedly until “ PC” , “ MD” or “ TAPE” appears.Start playing the connected component.
To select the desired connected component1Turn on the system.
2Press FUNCTION repeatedly until “PC”, “MD” or “TAPE” appears.
3Press MENU/NO on the remote.
4Press . or > on the remote repeatedly to select the desired connected component.
To listen to | Select |
The connected personal computer | PC? |
The connected MD deck | MD? |
|
|
The connected tape deck | TAPE? |
|
|
5Press ENTER/YES on the remote.
Recording on a connected
component
Making a digital recording on a digital component1 Connect the digital optical cable.See “ Hooking up optional components” on page 21.
2 Start recording.Refer to the operating instructions provided with connected component.
Making an analog recording on a component1 Connect the audio cord.
See “ Hooking up optional components” on page 21.
2 Start recording.
Refer to the operating instructions provided with connected component.