Tips

•You can start playing from the desired track in step 3.

1Press CD/MD =0 or )+ repeatedly until you find the desired track.

2Press CD ^.

•Pressing CD ^ (or CD ( on the remote) when the power is off automatically turns the power on and starts CD play if there is a CD on the disc tray (One Touch Play).

•You can switch from another source to the CD player and start playing a CD by pressing CD ^ (or CD ( on the remote) (Automatic Source Selection).

•If there is no CD on the disc tray, “CD NO DISC” appears in the display.

Notes

•Do not use a CD with tape, seal or paste, on it as this may damage of the system.

•Do not push the disc door closed, as this may damage the system. Press CD 6 (or OPEN/ CLOSE CD on the remote) to close the disc door.

Recording a CD on an MD

— CD-MD Synchro Recording

You can make a digital recording of a CD on an MD, marking track numbers in the same sequence as the original CD. If you use a recorded MD, the system automatically locates the end of the recorded portion and starts the new recording from there. You can also record a program of favorite tracks (see page 31).

To turn on the system, press 1/u.

1/u

4 5 2,3

 

6

g

1/u(P p (P p

+

= 0) +

–

–+

6

MD indicator MD p MD 6

1 Insert a recordable MD.

With the arrow pointing toward the system

With the label side up and the shutter slide rightward

Operations Basic

continued

15