Timer recording radio programs (continued)

5 Set the time to start recording.

Press +/– to set the hour, then press ENTER/YES.

The minute indication flashes.

LEVEL- SYNC REC

DBFB

O N

8 : 0 0

Press +/– to set the minute, then press ENTER/YES.

The hour indication flashes again.

6 Set the time to stop recording following the procedure in step 5.

7 Press ENTER/YES.

The start time, followed by the stop time, preset number and the “MD” appear, then the original display appears.

8 Insert a recordable MD.

9 Press 1/u to turn off the system.

To change the setting

Start over from step 1.

To check the setting / To reactivate the timer

Press CLOCK/TIMER SELECT repeatedly until “REC TIMER” appears. The start time, followed by the stop time, the preset number, and the “MD” appear, then the original display appears.

To cancel the timer

Press CLOCK/TIMER SELECT repeatedly until “TIMER OFF” appears.

Tip

When you record from the radio, you can mark on the MD, the start time, the stop time and the title automatically if you have labeled the preset stations (see page 47).

Notes

•You cannot activate wake up timer and recording timer at the same time.

•Do not operate the system from the time the power turns on until the recording starts (about 20 seconds).

•When you record on a blank MD, the first 15 seconds are not recorded.

•If the power is on about 20 seconds before the preset time, the recording will not be made.

•The volume is reduced to minimum during recording.

52