Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 5).
1 Prepare the sound source you want to play.
•CD: Insert a disc. To start from a specific track, make a program (see “Creating your own program” on page 7).
•TUNER: Tune in the preset radio station (see “Listening to the radio” on page 9).
2 Press VOL +/– (or turn VOLUME control on the unit) to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly until “DAILY SET ?” appears, then press
ENTER.
5 Set the time to start playing.
Press . or > repeatedly to set the hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the minute, then press ENTER.
6 Set the time to stop playing following the same procedure as step 5.
7 Press . or > repeatedly until the desired sound source appears.
Each time you press the button, the display changes cyclically as follows:
TUNER yCD PLAY
8 Press ENTER.
The start time, the stop time, the sound source and the volume appear in turn, then the original display returns.
9 Press ?/1 to turn off the system.
Other operations
To | Do this | |
Check the setting | 1 | Press CLOCK/TIMER |
|
| SELECT. |
| 2 | Press . or > |
|
| repeatedly until “DAILY |
|
| ON?” appears, then press |
|
| ENTER. |
|
| |
Change the setting | Start over from step 1. | |
|
|
|
Cancel the timer | 1 | Press CLOCK/TIMER |
|
| SELECT. |
| 2 | Press . or > |
|
| repeatedly until “DAILY |
|
| OFF?” appears, then press |
|
| ENTER. |
|
|
|
Notes
•If you use the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
•If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated.
•You cannot use the optional component connected to MD (TAPE) IN jack as the sound source for Daily Timer.