To improve tuner reception
When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on.
1Press CD (or FUNCTION on the unit repeatedly) to switch the function to CD.
2Press ?/1 to turn off the system.
3Press ?/1 while holding x. “CD PowerOff” appears.
To set CD power on
Repeat the procedure above and “CD PowerOn” appears.
Notes
•When “CD PowerOff” is selected, disc access time is increased.
•You cannot change the setting in Power Saving Mode.
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 8).
1 Press TUNER/BAND repeatedly (or move lever on the unit to FM or AM) to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until “PRESET” appears in the display.
3 Press PRESET +/– repeatedly to select the desired preset station.
Listening to non-preset radio station
— Manual Tuning
1 Press TUNER/BAND repeatedly (or move lever on the unit to FM or AM) to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until both “AUTO” and “PRESET” disappear from the display.
3 Press TUNING +/– repeatedly to tune in the desired station.
Tips
•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
•When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.
•Press TUNING MODE repeatedly until “AUTO” appears in step 2 above, then press TUNING
Tuner
9GB