Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number.
Automatic tuning presetYou can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.
1 Press TUNER/BAND repeatedly (or move lever on the unit to FM or AM) to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until “AUTO” appears in the display.3 Press TUNINGThe frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo program only) appear.
If “TUNED” does not appear and the scanning does not stopSet the frequency of the desired radio station as described in steps 2 and 3 of “Manual tuning preset” (page 8).
4 Press TUNER MEMORY.The preset number flashes. Perform steps 5 and 6 while the preset number flashes.
Preset number
6
7 Repeat steps 1 through 6 to preset other stations.Tip
Press TUNING MODE to stop scanning.
Manual tuning presetYou can manually tune in and store the radio frequency of the desired stations.
1 Press TUNER/BAND repeatedly (or move lever on the unit to FM or AM) to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until both “AUTO” and “PRESET” disappear from the display.
3 Press TUNING +/– repeatedly to tune in the desired station.4
5
6
7 Repeat steps 1 through 6 to preset other stations.Other operations
To | Do this |
Tune in a station | Follow the procedure described |
with a weak signal | |
| |
|
|
Set another station | After step 4, press PRESET +/– |
to the existing | repeatedly to select the preset |
preset number | number you want to store the |
| station. |
|
|
Tips
•The preset stations are retained for about half a day even if you disconnect the mains lead or if a power failure occurs.
•To improve the reception, adjust the supplied antennas or connect an external antenna.
8GB