Press ENTER.
Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.
Attaching the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

Inserting two R6 (size AA) batteries into the remote

e

Setting the clock

1

2

3 Press . or > repeatedly to set the hour.

4

5 Press . or > repeatedly to set the minute.6 Press ENTER.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET.

2Press . or > until “CLOCK SET?” appears, then press ENTER.

3Do the same procedures as step 3 to 6 above.

Note

Started Getting

E e

Note

E

The clock is not displayed in Power Saving Mode.

Tip

When you adjust the clock while the system is off, do the same procedures as step 2 to 6 above.

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

When the remote no longer operates the system, replace both batteries with new ones.

Opening the front cover

Pull down the upper right corner of the front cover on the unit.

Front cover

5GB