Sony CMT-SE1 Messages, 18GB, Over, TUNER, TIMER, No Disc, No Step, Complete, Push STOP, Step Full, SET CLOCK, SET TIMER, OFF TIME NG

If the system still does not operate properly after performing the above measures, reset the system as follows:

1Disconnect the mains lead.

2Reconnect the mains lead.

3Press ?/1 to turn on the system.

4Move lever on the unit to x and press FUNCTION and ?/1 on the unit.

The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer.

One of the following messages may appear or flash in the display during operation.

No Disc

There is no disc in the player.

No Step

All of the programmed tracks have been erased.

Over

You have reached the end of the disc while pressing

Mduring playback or pause.

Push STOP!

You pressed PLAY MODE during playback.

Step Full!

You tried to program 25 or more tracks (steps).

TUNERComplete!

The preset operation ended normally.

TIMEROFF TIME NG

The Daily Timer start and end times are set to the same time.

SET CLOCK!

You tried to set the timer, before you set the clock.

SET TIMER!

You pressed CLOCK/TIMER SELECT, before you set the timer.