Customizing Your Monitor

For vertical adjustment, select V using the ˘/³ buttons and adjust the position using the +/– buttons.

+ . . . to move the picture up

– . . . to move the picture down

CENTER

H

V

26

5When you have finished, click [END] on the screen to turn off the test pattern.

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button twice.

Adjusting the Picture Brightness

Once the brightness is adjusted, it will be stored in memory for all input signals received.

1Press the ¨ (brightness) ˘button.

The BRIGHTNESS OSD appears.

BRIGHTNESS

26

48. 4kHz / 60Hz

Horizontal Vertical

Frequency* Frequency*

2Press the +/– buttons.

+ . . . for more brightness

– . . . for less brightness

The OSD automatically disappears after about 3 seconds.

*The horizontal and vertical frequencies for the received input signal appear in the BRIGHTNESS OSD.

If the screen is too bright when using the monitor in a dark room

Decrease the BACKLIGHT (page 16).

Adjusting the Contrast

Once the contrast is adjusted, it will be stored in memory for all input signals received.

1Press the > (contrast) ³button.

The CONTRAST OSD appears.

CONTRAST

26

48. 4kHz / 60Hz

Horizontal Vertical

Frequency* Frequency*

2Press the +/– buttons.

+. . . for more contrast

– . . . for less contrast

The OSD automatically disappears after about 3 seconds.

*The horizontal and vertical frequencies for the received input signal appear in the CONTRAST OSD.

Changing or Adjusting the Color Temperature

The color temperature is set to 9300K at the factory.

You can change the color temperature to 6500K or 5000K. Use this function to adjust the color temperature so that it matches the actual colors of a printed picture.

Once the color temperature is adjusted, it will be stored in memory for all input signals received.

1Press the MENU button.

The MENU OSD appears.

MENU OKMENU

MENU

EXIT

PHASE

PITCH

CENTER

COLOR

LANGUAGE

OPTION

14