Step 1: Connect the monitor to the
computer
Turn off the monitor and computer before connecting.
Connecting to an IBM PC/AT or compatible computer
| to HD15 |
|
IBM PC/AT or |
|
|
compatible |
|
|
computer | to monitor output | HD15 video |
| ||
|
| |
|
| signal cable |
|
| (supplied) |
If your PC system is not compatible with Plug & Play (DDC1 and DDC2B)
This monitor uses the No. 9 pin in the video signal connector for Plug & Play (DDC1 and DDC2B) compatibility. See page 21 for the location of the No. 9 pin.
•If your computer accepts the No. 9 pin, use the supplied HD15 video signal cable.
•If your computer does not accept the No. 9 pin, please consult your dealer for advice on obtaining an HD15 adapter.
Getting Started
Connecting to a Macintosh
Use the supplied Macintosh adapter.
to HD15
Macintosh or | HD15 video |
| |
compatible computer |
| ||
to monitor output | signal cable |
| |
| (supplied) |
| |
Macintosh adapter |
|
| |
(supplied)* |
|
| |
* Connect the supplied Macintosh adapter to the computer before | GB | ||
connecting the cable. This adapter is compatible with Macintosh | |||
| |||
LC, Performa, Quadra, Power Macintosh and Power Macintosh |
| ||
G3 series computers (sold before January, 1999). If you are |
| ||
connecting to a Power Macintosh G3 series that sold after |
| ||
January 1999, you will need a different adapter (not supplied). |
| ||
Macintosh II series and some older versions of PowerBook |
| ||
models may need an adapter with micro switches (not |
| ||
supplied). |
|
| |
Step 2: Connect the power cord
With the monitor and computer switched off, connect one end of the power cord to the AC power adapter, and the AC power adaptor to the monitor. Then connect the other end o the power cord to a power outlet.
to DC IN
to a power outlet
Power cord
(supplied)AC power adapter (supplied)
7